FLOW Control®

Designed for use with Rapid Set® cement products and most other packaged hydraulic cements, FLOW Control® performs two functions. First, adding FLOW to your mix will significantly increase the fluidity of the mixture. A stiff mix becomes soupier when using FLOW. Second, FLOW increases the strength and reduces the shrinkage of your mixture when you use the FLOW as a replacement for mixing water. When using FLOW, the same working consistency (or slump) may be produced with approximately 20% to 40% less mixing water. With Rapid Set® Mortar Mix (55-lb. bag), Grout (55-lb. bag), Concrete (60-lb. bag), and DOT Repair Mix (55-lb. bag), use 1 to 4 packets of FLOW Control® to increase fluidity, and/or increase strengths to satisfy jobsite requirements. A trial batch is recommended to fine-tune the dosage. FLOW Control® may be used in combination with all other products of the Concrete Pharmacy®.

 

 

Flow Control Technical Data Sheet PDF

Flow Control Material Safety Data Sheet PDF

 


For more information on these and 
other CTS Cement products 
contact your local Williams dealer.


Visit the CTS Website




Contact Us